Products

SYSTEMTRAB Surge Suppressors

High-energy lightning surges invade a facility through the AC power feed. For this reason, proper surge protection development should start here. Utility-generated transients also occur here, making the possibility for severe surge events very high. Properly protecting the AC power feed sheilds a facility from the damaging effects of these transients.

Combination lightning arrestor and TVSS. Complete coordinated hybrid surge protection system in NEMA 4 enclosure

Features

  • Protection of AC power mains from direct lightning strike energy.
  • Combination lightning arrester and TVSS. Complete coordinated hybrid over voltage protection system.
  • Discharges 50 kA of surge current as tested by the only lightning protection test standard-IEC 61024 10 S waveform. Similar to energy of 1 million amps 8 x 20 S waveform.
  • Utilizes the revolutionary Arc Chopping Spark Gap technology. Discharges complete lightning surge currents while extinguishing up to 50 kA of follow current.
  • Residual voltage below 900 volts during full surge current discharge.
  • Systems are flexible to meet any user requirement. Systems include 200 kA IC surge rated fusing with disconnect.
  • 10 year "No-Nonsense" warranty. Free replacements of any failed components.
  • UL 1449, 2nd Edition. 6D52. Figure 1.
  • COMBOTRAB with NEMA 4 enclosure and diagnostic light indication lightning test waveform (IEC 61024).
  • MOV and SAD technologies are NOT designed to address the energy

When you are looking for the latest in SYSTEMTRAB Surge Suppressors, look to Phoenix Contact and GCF.
For more information on the complete line of Phoenix Contact products, call us anytime at (201) 767-6100,
or send us an e-mail at sales@gcf-inc.com